I concur about rechargeables - it doesn’t seem common for devices that take AA or AAA to have a battery gauge and it would be nice to be able to check the level on my rechargeables stock so I can know if I should top them off without needing to put each of them into the charger.
At least with radicle all the forks will still exist even if the authoritative copy is taken down. And even then I think because radicle is like BitTorrent, anybody who pinned the main repo would still be seeding it so it would be very hard to scrub it completely. The main challenge in using radicle is getting an active contributor with some reputation to maintain their copy on there. Otherwise there’s no momentum and nobody will pin the countless mirrors published by randos.
Hah I wish we could ignore them. It seems to just vary from ISP to ISP in the US but our small town ISP turns off your connection and puts you behind a captive portal forcing you to click through and accept what you did wrong before your connection is turned back on.
Yes I do this. Same exact library folders so I can let my friends use whatever they prefer. If everything is named in a Plex friendly way it should just work in jellyfin.
My main complaint is when it decides to just stop casting to Chromecast in the middle of episodes randomly - then I have to open the app, reconnect, and resume.
Also I find the Chromecast controls stop responding frequently making it so I can’t pause what I’m watching - it’ll like disconnect from the Chromecast but keep playing.
My partner also complains about lots of bugs on the iOS app.
Our ISP sends 3 strike letters :(
I would just accept the terms and disable wifi, or if you don’t want to double nat just use a switch and accept the terms / login on every device connected to the switch.
Is running a pds really equivalent to running your own instance? As I understand it, 2 friends running their own pds cannot federate without the centralized relay which still can’t be self hosted.
I tried the .ps one and it worked for me
You can achieve a similar thing using vlans - usually by default they’re isolated but you may add specific rules that allow traffic between vlans if it meets certain criteria (specific ports, specific types of traffic, traffic to or from specific hosts, any combination of those). So yeah you can imagine client isolation being like having each client on their own vlan - except without needing a different subnet for each client.
To add to the other reply, client isolation is about controlling whether an ap, switch, or router willingly sends traffic between clients. Because of that, it doesn’t kick in if you listen to packets over the air before they’ve been received by an AP. For that kind of security you need a wifi specific security measure - which I think “enhanced open” is what you’d be interested in. It allows you to have an open passwordless wifi but it generates temporary encryption keys for each connected client, then the rest is as if it was using WPA, so that you don’t need to enter a password but your traffic gets encrypted and protected from anyone else listening in on the WiFi.
If you combine both then you should have a network where each device is isolated both over the air and from a routing perspective so that each device only sees an Internet connection and no other devices.
The same way filebot and any other tool does - the file needs to have some label, either an absolute episode number or a season + episode number. I’m not aware of any tool that is able to look at the contents of the video to figure out which episode it is visually without any information from the filename - but I’d be happy to be proven wrong because I would be impressed.
Sonarr/radarr does analyze the content somewhat but that’s just for gathering resolution, codec, HDR, audio languages, and subtitle information, which can all be added to the filename format for inclusion during renaming.
I second using sonarr/radarr, once imported it detects episodes and lets you one click rename to a specific format and folder organization.
If you don’t want any of the other features of sonarr/radarr (like having a way to filter and manage your collection to see what’s in what quality or from what release group, searching multiple indexers with a single search, being able to send a specific search result to a downloader and have it automatically imported and organized when complete, or have auto downloading based on requests using scoring rules that you set), then there’s also filebot which a lot of people seem to like and seems to be just for matching with online metadata and renaming.
But I haven’t tried filebot since I like the extra features and capabilities of sonarr/radarr. It makes it easy to manage several library folders like an archive for anything that’s been reviewed, is complete, and in a quality/codec that I’m satisfied with, and keeping track of currently airing shows in my active folder which is where I also keep auto downloaded stuff I haven’t reviewed.
Probably because he already did an nft collection apparently, according to the article.
I use a nuc10i7fnkn and since transcoding is almost entirely done using the dedicated quicksync hardware in the CPU you don’t end up actually using the CPU much. So I’m sure it would work on an older generation or the i5 version. I don’t know much about the N100 but it looks like it would be very capable. Supposedly it boosts to 3+GHz and it’s a 10nm node compared to my NUCs 14nm. But the GPU has the same number of execution units so I’m not sure if the quicksync transcoding performance is that different. I saw someone mention 3 simultaneous 4K transcodes and I think I got about that much on mine. Generally for quick sync performance you just compare the Intel hd or uhd graphics model (like 630, 730, uhd, etc) and the number of execution units and that should correlate to the performance. Also check the Wikipedia page for quicksync for codec compatibility (under the Hardware decoding and encoding section), but anything recent will handle most stuff you’d need: https://en.m.wikipedia.org/wiki/Intel_Quick_Sync_Video
I actually run my arrstack on a Synology, it has official support for docker and docker-compose. Granted I do have a higher powered model (the DS1621xs+) but most of the arrstack is fairly low power friendly.
You can also get away with running Plex on a nas but I would only do it if 1. Your nas has a quick sync supported CPU and you get that enabled properly or 2. You go the direct streaming only / no transcoding setup - which means checking the codec support for all client devices and either only downloading exactly the supported codecs or pre-transcoding everything.
What I do is actually run Plex/JF on a separate nuc and point it at the nas using a network mount. Just don’t use a network mount for the Plex app database (maybe same applies to JF too), just mount the media files itself. Running Plex and having it access the DB over a network mount is a big no no for various reasons.
I’m glad to clear it up! It’s a super powerful tool, and I still occasionally skip the automation and just use it for manual searches since it reduces that process to a single click to search all configured torrent sites and a single click to download and have the rest automatically handled.
Before when I was visiting friends and wanted to quickly add something to plex, I used to need remote access to my torrent client and separate remote access to my NAS filesystem to move/rename files when downloads finish which was a really manual process. Now all I need is the reverse-proxied sonarr/radarr UI since it handles moving/copying/renaming on download completion - and while the UI isn’t mobile-first, it’s very usable and feels less error-prone than moving/renaming files remotely using a file explorer app.
I mean yeah there’s a lot of stuff it does, but you can pick and choose what you want to use it for so it depends on what you would find useful - you don’t have to use the full automation. I started just by using it as a read-only way to see what movies I had and in what qualities and keep things organized. You can use it as a manual interface to do one-off downloads - basically just as an interface to search 5 torrent sites in 1 place where you are still picking exactly what you want it to download. You can use it only to rename files to a consistent format. So there are a lot of ways to use the various features of sonarr/radarr besides automatic downloads. You’re not forced to go all-in and out of the box it doesn’t start automatically downloading until you enable that.
I think it’s a common misconception that if you use sonarr/radarr you have to use download automation and set up trackers but it’s not the case. It’s a useful library organization tool even if you don’t ever have it download anything.
Man that sucks. I must have gotten lucky or something with my setup. I also have trackers go unavailable all the time but I enabled 8 different ones and usually multiple will have the same torrent so it usually has no problem finding something even if 1 or 2 are down. I also don’t VPN tracker searches, just my BitTorrent client so flaresolverr seems to work fine for me (I only have it enabled for 2 of my trackers since most of the ones I use don’t seem to require it).
If you end up trying it out again I would look into the quality settings and make sure you’re not using the remux quality profile (edit: apparently the default 1080p quality profile has the 1080 remux quality enabled so this might have been the problem). By default most of the quality profiles seem to limit at 100MB/min, so a 2 hr movie shouldn’t allow anything over like 12GB. Whenever I tweak quality or custom formats I refer to trash guides which has a lot of battle-tested rules you can copy. I have my main quality profile set to only download qualities between hdtv720 and br1080 (which is just below remux) with custom formats copied from trash guides set to prefer hevc with surround sound since I have 5.1.
Lmao the first thing that came to mind was the “is there anyone else you forgot to ask” meme with apple in between the user and app developer.